BS551-10 is a high performance full hot air convection reflow soldering system with computer control which can handle boards up to 405 mm width with less than +/-2 Degrees temperatures gradient.
Show trend of product
A screen like this will appear with graphs steadily changing for each temperature zone. When a thermocouple is connected a dotted line will appear indicating the probe's temperature.
Seleting a recipe
All programms can be stored for users' convenience. The programm is stored together with project name and creating date, so the right profile is always available.
Creating a program
Creating a program can be done in the operating menu. All settings entered with soft keypad will be remembered after powering down the machine.
In the operating menu, users can find all information about the temperatures for each zone and conveyor belt speed. In this menu screen users are allowed to set any temperature between 0 and 300°C for each zone with increments of 0.1°C and any conveyor speed between 15 and 110cm/min with increments of 1cm.
RoHS lead free:
The reflow oven BS551-10 is developed for lead free reflow soldering of SMT boards, hybrid board or curing adhesives.
The boards are transported through the oven on a conveyor belt made from high grade stainless steel spring wires with variable speed between 15 and 90 cm/min (5,91 to 35.43 inch/min).
Heating is achieved by forced air convection. This reduced the shadow effects and results in no colour sensitivity, no hot spots and no cold solder joints. The heating system is suitable for lead-free soldering.
Bottom cooling fans at the offload section ensure cooling of your circuits before leaving the transport belt.
All functions are controlled by a TFT touch screen display which is easy to program with a user friendly interface. Furthermore this control is equipped with a USB 2.0 compatible data interface for data output to a printer or storage device.
The integrated exhaust system transports fumes to an outdoor ventilation or filtration unit.
The included thermocouple wire can be used to monitor the temperature progress when attached to a PCB or any other object running through the oven on the conveyor belt.
* We reserve the right to make changes without notice.